Charging - Samsung POWERbot SR20J90 Serie Manuel D'utilisation

charging

It takes approximately 160 minutes (SR20J90✴✴U
Series) or 240 minutes (SR20K9000U✴ Series) to
completely charge the POWERbot when charging
it for the first time after purchase. Once charged,
the POWERbot can be used for approximately
30 minutes.
Charging light turns green during charging.
1
turn on the
emergency switch
on the bottom
You must turn on the emergency
switch to turn on the POWERbot.
2
manually charge
the PoWerbot by
placing it on the
docking station
Make sure the charging pins on the
POWERbot and the docking station
are aligned. For SR20K9000U✴
series, turn on the POWERbot by
pressing and holding the
more than 3 sec. to start charging.
ENGLISH-10
• Rated input voltage of this
product is 100-240 V~.
WARNiNG
3
check the
charging status
"
sequence to show charging
progress. All the 6 icons appear
when charging is complete.
for
" appear in the