Software Update (Usb) - Oceanic OCEALED32H20B7 Guide D'utilisation

Menu Operation
Reset, Reset the default factory setting.
Use the buttons ▼/▲ to select the item Reset and then press OK to enter the submenu.
The function performs return of TV settings to factory defaults, except for deletion of the list of tuned programs.

Software Update (USB)

Use the buttons ▼/▲ to select the item Software Update (USB), insert the USB device in the USB slot and then
press OK, to update the software.
WARNING:
Update the new TV software only in case when you have the original software producer
for the given type including the description of the changes. Any attempt to update with
non-genuine software, even with small differences may end up causing irreversible
damage to the TV, which is not covered by warranty
HDMI CEC
The feature performs settings of special items of digital communication between devices at the HDMI interface.
Follow the instructions in your external HDMI CEC to set the items and verify the correct communication.
Press ▼/▲ to select the item HDMI CEC and then press OK to enter the submenu.
CEC Control
Audio Receiver
Auto Standby, Device Auto Power Off, TV Auto Power On.
Press ◄/► to turn on or off the auto standby mode for this TV set as well as for a connected device.
Device List, Device Menu
Press the OK button to open the main menu of the device.
Press ◄/► to switch on or off the HDMI CEC function.
Press ◄/► to switch on or off the HDMI Audio receiver function.
36