Oceanic OCEALED32H20B7 Guide D'utilisation page 70

Menu Operation
Menu
Channel Menu - satellite
WARNING:
We strongly recommend that the antenna system is installed by an expert. A good quality
installation will reward you with a stable and trouble-free reception.
Press MENU to display the main menu.
Use the buttons ◄/► to select the item CHANNEL in the main menu.
Using the buttons ▼/▲ select the item, which you want to modify in the menu CHANNEL.
1.
2. Press OK and perform the modification.
3. When you finish the modification, press MENU, save the changes and return to the previous menu.
Acting on the information from your installer of the antenna system, specify all parameters for each of the satellites
for which your system is ready and which you intend to receive. If a parameter is wrong or your antenna system will
not accept any values Auto or None/None, it will not be possible to receive the satellite or under the name of a
particular satellite will be accepted another satellite.
When setting a satellite follow the description of the buttons for individual functions on the screen.
Select a satellite from the list, use the Right arrow to move in the parameter settings and set them correctly. Return
to the list using the button EXIT. When the parameters are properly set and if it is active the first of the transponders
on the list of the given satellite (still hidden) broadcasts the horizontal indicator Quality (bottom of the window)
changes from empty to a nonzero value, e.g. it will be in the middle of the range. If you want to display the list of
transponders of a given satellite, press the button EPG. Each transponder is mainly characterized by a frequency
(and also by H/V polarization and symbol rate, e.g. 27500 kSym/s) and carries several TV programs and if you want
to receive them, when selected, the indicator Quality must again show non-zero value, e.g. the middle of the range.
15