Operation Instructions; Setting The Clock; Setting The Oven Timer; Setting A Cooking Program - RCA RMW1414 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION INSTRUCTIONS

SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.

SETTING THE CLOCK

1.
Touch CLOCK pad.
2.
Use the number pads to enter the correct time.
3.
Touch CLOCK pad again.
NOTE:
·This is a 12 hour clock. When the oven is first plugged in or when power
resumes after a power interruption, the display will show ENTER CLOCK TIME.
If you prefer not to have the clock displayed, touch RESET.
SETTING THE OVER TIMER
1.
Touch TIMER.
Enter the time by touching the number pads.
2.
3.
Touch START/STOP.
NOTE:
·Time countdown can be seen on display before clock or cooking time is returned
to display.
·Touch TIMER and then touch RESET to cancel TIMER during timing process.
·The maximum time can be set is 99 minutes and 99 seconds.

SETTING A COOKING PROGRAM

A. One-stage Cooking
1.
Use the number pads to set a cooking time. You can set a cooking time from one
second to 99 minutes and 99 seconds.
2.
Touch POWER LEVEL pad once to set 100% power level, If you want to set a power
level other than 100% power, touch POWER LEVEL, then use the number pads to
enter the power level.
3.
Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
9

Publicité

Chapitres

Table des Matières
loading

Table des Matières