OPERATION INSTRUCTIONS
SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
SETTING THE CLOCK
1.
Touch CLOCK pad.
2.
Use the number pads to enter the correct time.
3.
Touch CLOCK pad again.
NOTE:
·This is a 12 hour clock. When the oven is first plugged in or when power
resumes after a power interruption, the display will show ENTER CLOCK TIME.
During cooking, you can press CLOCK to check the oven time.
SETTING THE OVER TIMER
1.
Touch TIMER.
2.
Enter the amount of time by touching the number pads.
3.
Touch START/STOP.
NOTE:
·Time countdown can be seen in display before clock or cooking time is returned to display.
·Touch TIMER and then touch RESET to cancel TIMER during timing process.
·The longest cooking time you can set is 99 minutes and 99 seconds.
SETTING A COOKING PROGRAM
A. One-stage Cooking
1.
Use the number pads to set a cooking time. You can set a cooking time from one
second to 99 minutes and 99 seconds.
2.
If you want to set a power level other than 100% power, touch POWER LEVEL,
and then use the number pads to enter the power level.
3.
Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
9