40
HOW TO USE
2. Freezer Bins and Lower
InstaView™Door-in-Door® bin
To remove the door bins, tilt the front of the
bin up slightly while pulling the sides forward.
To replace,align the bottom bin tabs with the
rail slots then push the bin in until it clicks into
place.
3. Upper InstaView™Door-in-Door®
bin
Removing
1
Open the latches underneath the bin by
rotating them inwards. Tilt the front of
the bin up until the tabs on the top sides
clear the rails, then push the bin slightly
backward. (It may help to open the glass
InstaView™ door.)
2
Hold both ends of the bin and lift.
Assembling
1
Make sure the bin latches are fully open.
Slightly tilt the front of the bin up to align
and insert the plastic tabs on the sides of
the bin into the indents in the rails. Hold
the sides of the bin and pull it slightly
forward to correctly position the latches.
2
Close the latches by rotating them toward
the sides of the bin.