16
INSTALLATION
Assembling the Right Refrigerator Door
Install the right refrigerator door first.
1
Make sure that the plastic sleeve is
inserted in the bottom of the door. Lower
the door onto the middle hinge pin as
shown in the figure.
2
Fit the hinge
over the hinge lever latch
and slot it into place. Rotate the lever
counterclockwise to secure the hinge.
1
3
Connect the wire harness
1
1
4
Position the cover in its place. Insert and
tighten the cover screws.
Hinge Lever Latch
2
.
Assembling the Left Refrigerator
Door
Install the left refrigerator door after the right
door is installed.
1
Make sure that the plastic sleeve is
inserted in the bottom of the door. Install
the refrigerator door onto the middle hinge
pin.
2
Fit the hinge
over the hinge lever latch
and slot it into place. Rotate the lever
clockwise
and fasten the hinge.
Hinge Lever Latch
2
3
Connect all the wire harnesses.
4
Push the water supply tube into the hole
on the top case and pull it through the
backplate.
1