5. If need a pause, press down the middle of knob.
6. If cancel the function, press down the knob and turn knob back
to "0".
【Boiling / Steam】mode --- heating processing.
⚫ Full program time: 30:00
⚫ DIY control panel
1. Turn the knob to【Boiling / Steam】mode
2. Press down the middle of knob to start the mode.
3. The machine heats up to a temperature of 100
4. Once the program is complete, the machine stops and goes
into stand-by mode, and 3 beeps sound.
5. If cancel the function, press down the knob and turn knob back
to "0".
cannot work under this mode.
o
C.