Publicité
Les langues disponibles
Les langues disponibles
The NVR manages three different video streams for each camera associated to one of its channels:
IMPORTANT
In case of Motion type planning, enable and configure the Motion function for each single channel on the
"Parameter" -> "Alarm" -> "Motion" page.
•
Main stream: max. resolution stream, used for video-recording on hard disk and displaying on local network
•
Sub stream: medium/high resolution stream, for remote displaying
•
Mobile stream: low resolution stream, for remote displaying.
To configure each stream open the OSD menu page "Network" and select the stream to be configured:
•
In Main stream menu page select "Default" and check that the factory default parameters are set.
Select "Copy" to copy the same parameters to all the channels and click on "Save" to save parameters in
the cameras.
31
EN
Publicité
Chapitres
