Publicité
Les langues disponibles
Les langues disponibles
•
To modify the connected cameras' Network Settings (e.g. to modify the camera IP address from DHCP to
Static, Subnet Mask, Gateway, Port) select
4.
The NVR is configured to automatically start the continuous recording of the cameras assigned to the channels.
Check that the red icon "R" is displayed for each camera.
5. In the LIVE Preview grid, by default the NVR displays the MAINSTREAM of all IP channels enabled and
configured, but if there are not enough resources to do so, the NVR automatically displays the SUBSTREAM of
all the IP channels.
6.
Whenever the message "Not enough resources" is displayed in the IP channels LIVE grid, please reduce
the MAINSTREAM or SUBSTREAM frame-rate and bitrate settings in the NVR OSD menu at the IP channel
settings page selecting "Main Menu" -> "Parameter" -> "Record" -> "MainStream" o "Main Menu" -> "Parameter"
-> "Record" -> "SubStream".
7.
If some IP camera parameters (example Mainstream, Substream, Mobile stream...) are modified using the
camera' s integrated webpage, it is then necessary to reboot the NVR to have the modified parameters updated
in the NVR menu page of the corresponding IP channel.
8. Once the network configuration has been completed, the NVR and the cameras can be remotely displayed
by iOS or Android smartphone by URMET iUVS plus application or from a PC station with Internet Explorer/
Firefox or UVS client software.
*NOTE
-
NVR default password is 00000000. It is suggested to change the password at the first menu access
in the page "Main Menu" -> "System" -> "Users".
- If the IP camera is not detected then try to add it manually.
- For further details see the instruction manual downloading from Urmet Web site (see QR code printed
on the Addendum sheet).
(see the circles in previous picture).
29
EN
Publicité
Chapitres
