Using The Dynamic Range Control; Using The Direct Control; Using The Dolby Pro Logic B - Pioneer AXM-P8000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Digital Signal Processor
2
Press q or r to adjust the source vo-
lume.
Each press of q or r increases or de-
creases the source volume.
SLA +4  SLA 4 is displayed as the source vo-
lume is increased or decreased.
Notes
! DVD, Video CD, CD and MP3/WMA are set to
the same source level adjustment volume
automatically.
! Analog5 and Analog6 are set to the same
source level adjustment volume auto-
matically.
Using the dynamic range
control
The dynamic range refers to the difference be-
tween the largest and softest sounds. The dy-
namic range control compresses this
difference so that you can clearly hear sounds
even at low volume levels.
! The dynamic range control is effective only
on Dolby Digital sounds.
1
Press p to select DRC.
Press p until DRC appears in the display.
2
Press r to turn the dynamic range
control on.
DRC ON appears in the display. Dynamic
range control is now on.
# To turn dynamic range control off, press
q.

Using the direct control

You can override audio settings to check for ef-
fectiveness of your audio settings.
1
Press p to select DIRECT.
Press p until DIRECT appears in the display.
2
Press r to turn the direct control on.
DIRECT ON appears in the display. Direct con-
trol is now on.
# To turn direct control off, press q.
Notes
! All audio functions are locked out during
DIRECT ON except VOLUME and Dolby PLB.
! If the source is a 2-channel LPCM audio or a
2-channel Dolby Digital audio and you select
DIRECT ON, audio is heared only over front
left/right speakers.

Using the Dolby Pro Logic B

Dolby Pro Logic B creates five full-bandwidth
output channels from two-channel sources to
achieve high-purity matrix surround.
! If both the center and the rear speakers are
set to OFF, you cannot use this function.
! Dolby Pro Logic B supports up to 48kHz
sampling rate stereo source and has no ef-
fect on other types of source.
1
Press p to select Dolby PLB.
Press p until Dolby PLB appears in the dis-
play.
2
Press q or r to select your favorite
setting.
! MOVIE  The Movie mode suitable for
movie playback
! MUSIC  The Music mode suitable for
music playback
! MATRIX  The Matrix mode for when FM
radio reception is weak
! OFF  Turn Dolby Pro Logic B off
# You can operate MUSIC only when MUSIC
has been selected.
Section
07
25
En

Publicité

Chapitres

Table des Matières
loading

Table des Matières