Maestro Bellini Manuel De L'usager page 17

•
Use a level to draw a vertical line on the wall. Make sure that the two (2)
lines are perfectly perpendicular.
•
Place the hood-mounting bracket (46 cm - 18 ") on the wall along the
horizontal line, make sure that it is level and centered on the median line.
•
Drill 4 holes for 5/16 "according to locations indicated each side
mounting bar. (8mm in diameter and 75 to 85 mm depth)
•
Install the wall anchors
Step 2:
•
Take out of the cooker hood from the carton and gently put it on a
horizontal worktable. Position the reducer pipe into the air outlet of the
inner duct, and then attach the exhaust pipe into the top of reducer outlet,
make sure it's secured. Bend the exhaust pipe more than 120°and run it.
Step 3:
Place the hood on the wall securely installed on the mounting bar.
•
Caution: make sure hood is secure before releasing it.
Step 4:
• Matching the holes of outer duct cover and blower box, fix the outer duct
cover to the blower box using the 8pcs M4× 10 screws provided.
Step 5:
Matching the inner duct cover with the holes, tighten the inner duct cover
•
with two 5x60 wood screws provided. Make sure that everything is
securely fastened.