Publicité
Les langues disponibles
Les langues disponibles
Step 3: Connect the two Middle Tubes with the Bottom Tube by screwing them together.
Step 4: Connect the Top Tube with the Middle Tube by screwing them together.
Step 5: Place the power cord plug through base, Bottom Tube, Middle Tubes and Top Tube. Connect the power cord plug to the
socket in the heater head.
Step 6: Push the Heater Head onto the Top Tube and fix in position using the M4x8mm screws.
Step 7: Fix the power cord on the rubber base by using two M4X15 screws.
www.sunred.nl
Publicité
