Ayce TGA2000i Mode D'emploi page 39

to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to
protect the operator from the effects of vibration, such as maintaining the tool and the
accessories, keeping hands warm, adjusting work patterns to avoid risk of vibration.
TROUBLE SHOOTING
Before performing any maintenance or cleaning work, always turn off the engine and
wait until the generator has come to a standstill.
CONDITION PROBABLE CAUSE
Loose spark plug
Insufficient Loose cylinder
compression head bolt
Damaged gasket
Fuel
systems
problems
No fuel
Engine supplied to
won't start combustion
chamber
Low engine
output
Engine run
erratically
Sufficient
compression
Combustion
chamber
supplied
with fuel
Improper
grade
of fuel used
WARRANTY CERTIFICATE
Congratulations! You have made an excellent choice with the purchase of this quality
product. Our commitment to quality also includes our service.
CORRECTIVE
ACTION
Tighten plug
properly
Tighten bolt
properly
Replace gasket
Insufficient
Pull rope
pulling speed
sharply
for starting rope
Foreign matter
Clean tank
in fuel tank
Clogged
Clean fuel line
fuel line
No fuel in tank Supply fuel
Fuel shutoff
Open valve
not open
Electric Spark plug dirty Remove carbon
systems with carbon or wipe up
problems or wet with fuel spark plug
Improper Damaged Replace
spark spark plug spark plug
Faulty
magneto
Improper
adjustment of Consult dealer
carburetor
Insufficient
Improper Pull rope
pulling speed
spark sharply
for starting rope
Check fuel
Overloading Check
the working
condition
Overheating
WARRANTY CERTIFICATE
Congratulations! You have made an excellent choice with the purchase of this quality
product. Our commitment to quality also includes our service.
Jumbo offers an excellent repair service, exclusively in Switzerland, for all ayce
Power Tool products.
Should you, contrary to expectations, experience defects due to
5
material or manufacturing faults during private use within
FIVE YEARS of the date of purchase we shall be liable for
warranty in accordance with statutory warranty regulations,
provided that:
- The device was not put to any use other than the intended.
JAHRE GARANTIE
- Was not overloaded.
ANS GARANTIE
ANNI GARANZIA
- Was not used with the wrong accessories.
- Repairs where not carried out by any other than the authorized
workshop.
The warranty certificate is only valid in connection with the receipt. Please keep both in
a safe place. The warranty does not affect your statutory rights. The product is
guaranteed for a period of FIVE YEARS beginning on the day of purchase. Keep your
purchase receipt safe as proof of the date of purchase. The guarantee period can only be
extended for the duration of any repair required. During the warranty period, defective
devices can be returned at every Jumbo store. We will, at our discretion either repair or
exchange the device in accordance with warranty legislation.
Please include the following when returning your product for repair:
1. The receipt (proof of purchase)
2. This warranty certificate with your name, address, contact details and a fault
description completed overleaf.
If the original receipt is not enclosed the repair will be charged for in all cases. After the
warranty has expired you can still return defective devices for repairs. Quotes as well as
repairs after warranty period are to be paid for in all cases.
Additional note service center:
Defect products can be returned to every jumbo store during the warranty period.
After the warranty period, the ayce products are accepted in any jumbo store, so the
product may be tested in accordance.
CH-Import & Distribution exklusiv durch:
Jumbo-Markt AG
Industriestrasse 34
8305 Dietlikon
| GB
15 16