Plug In Menu; Introduction; Language; Auto Tuner Setup - JVC AV-27D303 Manuel D'instructions

Introduction

The Plug In Menu comes up automatically when you first turn on the TV after plugging it in. The
Plug In Menu helps you to get your TV ready to use by letting you set your preferences for:
• The Language in which you want the onscreen menus to appear,
• The Auto Tuner Setup of which channels you wish to receive,
• Setting the TV's clock to the correct time so your timer functions will work properly.
Descriptions of each of the Plug In Menu features appear on this page and the next. We rec-
ommend you complete the Plug In Menu setup first so your TV is set up just the way you want,
right away.

Language

You can choose to view your onscreen menus in three languages: English (ENG.), French
(FRAN.), or Spanish (ESP.).
Press the M
To LANGUAGE
To choose a language
ENG.
• You will not need to press the M

Auto Tuner Setup

In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the C
HANNEL
Press the M
To AUTO TUNER SETUP
To operate
To choose CABLE or AIR (or SKIP)
To move to START
To start Auto Tuner Setup
Programming will take approximately 1 to 2
• Noise Muting will not work during Auto Tuner Setup.
• You will not need to press the M
• SKIP appears only for Plug in Menu.
button
ENU
FRAN.
button to enter this screen from the Plug In Menu.
ENU
+/- buttons) you will receive only clear, active channels.
button
ENU
NOW
PROGRAMMING !
48
minutes.
PROGRAMMING OVER!
button to enter this screen from the Plug In Menu.
ENU

Plug In Menu

ESP.
25