Overload Protection; Servicing Optional Spark Arrestor - Milller Wildcat 200 Manuel D'utilisation

8-6. Overload Protection

8-7. Servicing Optional Spark Arrestor

Tools Needed:
1/4 in
OM-237 711 Page 38
.
Fuse F1 located in wiring
harness behind left side door.
1
1
.
A complete Parts List is available at www.MillerWelds.com
!
Stop engine. Disconnect
negative (−) battery cable.
1 Fuse F1
F1 protects the engine wiring sys-
tem from overload. If F1 opens,
engine will not crank.
Replace open fuse. Reinstall cover
before operating.
.
If a fuse opens, it usually indi-
cates a more serious problem
exists. Contact a Factory Au-
thorized Service Agent.
!
Stop engine and let cool.
1 Spark Arrestor Screen
Clean and inspect screen. Replace
spark arrestor if screen wires are
broken or missing.
805 396
805 254