Maintenance - C.M.O Electro Power IC Mode D'emploi

EXTRA ACCESSORY KIT (code KET/A/IC)
Weight of the complete kit
Package dimensions
Nr.
2
2
1
2
1
2
3
3
2
2
10
10
1
1
1
1
1

9. Maintenance

We suggest to follow the maintenance operations only after reading this manual carefully and learned
the use of the equipment with its practical use.
The operations described below are the only ones that the operator is authorized to carry out; any
other intervention on the equipment is considered tampering and it will involve the automatic
decadence of the guarantee.
 Every maintenance operation must be carried out after disconnecting the battery from the
equipment.
 Please do a periodic check of the nuts. Please verify that they are not loosed and that the
equipment is not damaged.
 Periodically lubricate the guide of the key on the piston stroke with grease.
 Check that the threading on the equipment and on the kit of accessories is not damaged.
 Periodically clean the equipment with care, removing dirty, dust and possible smear and slippery
substances. Use self-cleaning clothes, do not use water, inflammable or corrosive liquids.
Extra accessory kit :
Description
Rubber feet
Supports for terminals
Perforated bracket (3 holes)
Fixed supports
Fixed clamps
Perforated extension 170 mm (5 holes)
Perforated extension 290 mm (9 holes)
Support for perforated bracket
Rubber feet supports
Pins with split pin
Butterfly part.
Extension 125 mm
Extension 170 mm
Extension 300 mm
Extension 500 mm
18,3 Kg
620x425 h 150 (mm)
Clamp
"L" pins
23