Neogen PRIMA-SHOT Manuel D'utilisation page 4

7.) Remove bottle from needle.
8.) If an air bubble remains in the barrel, point the barrel upward allowing the bubble to float to the needle
end.
9.) Set the dose to 0.5ml, then carefully squeeze the handles to expel the air without pushing the fluid out.
10.) Once the air is expelled out of the barrel, ensure desired dosage is selected and then the syringe is ready
to use.
NIB
NEEDLE
NUT
PISTON O-
RING
1.)Remove safety cover
from needle.
2.)Ensure piston is all the
way forward.
3.)Insert needle through
rubber stopper into bottle.
COMPONENTS OF THE PRIMA SHOT
PISTON
PLUNGER
ATTACHMENT
RACK
TO FILL BARREL:
BARREL
2-ENGLISH
4.)Rotate knob counter-
clockwise 90 degrees.
5.)Grasp the plunger pull
knob and pull away from
the barrel gradually, until
you reach the desired
volume or the barrel is full.
6.)Rotate knob clockwise
until it stops. The rear
handle is now engaged
with the plunger.
PULL KNOB
UNLOCKED
DOSE
ADJUSTER
REAR
HANDLE
PLUNGER
PULL
KNOB