Klarstein 10031386 Mode D'emploi page 23

Water drainage
During dehumidifying mode, remove the upper drain plug from
the back of the unit. Attach the drain hose to the hole. Place the
other end of the hose in the drainage way or other drain areas .
If the unit you bought has the pump drain out-
let, as shown below, please drain in this way:
Remove the pump drain plug from the back
of the unit, attach the drain hose to the hole.
Place the other end of the hose in the drai-
nage way or other drain areas. Make sure the
hose is secure and there are no leaks. Direct
the hose toward the drain, making sure that
there are no kinks that will stop the water
flowing. Place the end of the hose into the
drain and make sure the end of the hose is
down to let the water flow smoothly. Do ne-
ver let it up.
When the water level of the bottom tray reaches predetermined level, the digital dis-
play area shows"P1". Carefully move the unit to a drain location, remove the bottom
drain plug and let the water drain away .Reinstall the bottom drain plug and restart the
machine until the P1 symbol disappears. If the error repeats, call for service.
NOTE: Be sure to reinstall the bottom drain plug before using the unit.
23