EN
18
1
Microphone lnput(1/4"): Connect a microphone to this microphone
input terminal.
Seven Band Equalizer: Move the individual sliders to adjust certain
2
frequencies to desires levels.
3
USB/SD/BT: press this button to move to the previous track.
UKW-Radio: press this button to move to the previous channel. Hold it
to reduce the volume.
MODE: Press this button to toggle between the various inputs (LINE,
4
USB, SD ,FM, BT)..
5
When on the mode of USB/SD, press this button to pause or play. Hold
it to select the repeat modes for USB/SD.
When on BT mode, press this button to pause, hold it to disconnect
pairing.
6
USB/SD/BT: Zum nächsten Titel springen.
FM radio: press this button to move to the next channel. Hold it to
increase the volume.
7
USB/SD card slot
Connect your USB memory storage or SD card device here. The speaker
will only play music files from USB/SD input. Do not connect your
computer to this input as it will not play files directly from a computer.
Important: The USB port is intended only for data transfer only, other
devces cannot be used with this USB connection. The use of USB
extension cords is not recommended.
Charging indicator: When the unit is fully charged, the LED will light up
8
solid.
Master Level Control: Turn this knob to adjust the master volume.
9
10 Power and BT indicator
The power indicator will light up solid when the unit is ON.
BT indicator will light up solid when in connecting,
and it flashes when paring.
TREBLE: Turn this knob to adjust the treble.
11
12 BASS: Turn this knob to adjust the bass.
13 ECHO: Use this knob to adjust the microphone volume level of the
microphone input.
14 MIC VOLUME: Turn this knob to ajust the microphone volume level of
the microphone input.
15 GUITAR: Turn this knob to adjust the volume level of your guitar.
16 Guitar Input (1/4"): Connect a guitar to this input terminal.
17 AUX (3,5 mm): The input is designed to connect directly to a music
player or any other level audio device.
18 IT remote receiver