Rohr DFC-10P Mode D'emploi page 7

DFC-10P / DFC-50P / DFC-450P / DFC-650P
1. Ammeter - displays current / load
2. '1-2' Function - Adjusts ampere output
3. Amp output switch, MIN - Trickle charge / MAX - Fast Charge
4. Mode switch - charging / jump start
5. On / off switch
6. 12 Volt positive terminal
7. 24 Volt positive terminal
8. Negative terminal
9. Fuse housing
1. LCD Ammeter - displays current / load
2. Power indicator light
3. Operation dial - turn left for jump start function and turn right for charging currents
4. Timer - used to control charging duration, must be used when operation dial is at 4, 5 or 6.
5. 12 Volt positive terminal
6. 24 Volt positive terminal
7. Negative terminal
8. Fuse housing
Fig.3 - Panel Controls for the DFC-450P
Fig.4 - Panel Controls for the DFC-650P
© ROHR
English
7