Beem Fresh-Aroma-Perfect V2 Mode D'emploi page 31

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
Fill with coffee as described in the
section Filling with coffee beans
(page 24).
Insert an empty unused filter bag as
described in the section Inserting a
new filter bag (page 24).
Select the desired number of cups as
described in the section Setting the
number of cups (page 24).
Set the desired strength of coffee as
described in the section Setting the
coffee strength (page 25).
Set the grinding fineness as described
in the section Setting the grinding
fineness (page 25).
Press the
button (21) to switch
on the grinder.
The indicator lamp (20) is lit; the
freshly ground coffee powder is passed
through the shaft of the grinder into the
filter compartment (10), and the coffee
is brewed.
When the brewing process has been
completed, the "cup" symbol (22) in the
top left of the display starts flashing.
NOTE
The appliance switches itself off auto-
matically after 2 hours.
Cancelling the brewing process
Press the
button (21) to cancel
the brewing process and switch off the
appliance. The indicator lamp (20) goes
out; the appliance is switched off.
BEEM - Elements of Lifestyle
Fresh-Aroma-Perfect V2
Brewing coffee with
coffee powder
NOTE
Activate the display lighting by press-
ing any key. The lighting goes out
60 seconds after the last button was
pressed.
Fill with water as described in the sec-
tion Filling with water (page 24).
Insert an empty unused filter bag as
described in the section Inserting a
new filter bag (page 24). With the help
of the measuring spoon supplied (1
level spoon per cup), fill the filter bag
with the required amount of coffee pow-
der up to a maximum of 2 cm under the
filter edge.
Press the
button (27) to start
brewing coffee.
The power indicator
the coffee is brewed.
When the brewing process has been
completed, the "cup" symbol (22) in the
top left of the display starts flashing.
NOTE
The appliance switches itself off auto-
matically after 2 hours.
Cancelling the brewing process
Press the
button (27) or the
button (21) to cancel the brewing proc-
ess and switch off the appliance. The
power indicator
appliance is switched off.
(26) lights up,
(26) goes out, the
27

Publicité

Table des Matières
loading

Table des Matières