Rinsing And Cleaning The Unit; Cleaning And Refitting The Suction Check Valve - tefen MixRite 2.5 Manuel Utilisateur

6.1. Rinsing and Cleaning the Unit

Rinsing of the MixRite is required when changing chemicals and before handling
the MixRite, to avoid any contact with the chemical.
Rinse the MixRite as follows:
1. Rinse the unit by pumping clean water from the additive container.
2. Wash the external surface of the unit with clean water.

6.2. Cleaning and Refitting the Suction Check Valve

Before removing Suction Check Valve, turn off the water supply and allow the
pressure to drop to zero.
Remove Suction Check Valve according to the steps shown.
Rinse parts of Suction Check Valve with clean water, re-assemble them in the order
shown and ensure that the spring is in good working condition.
Re-assemble Suction Check Valve in the reverse order.