Operation; Adjusting The Mixrite - tefen MixRite 2.5 Manuel Utilisateur

5.

OPERATION

5.1. Adjusting the MixRite

Important!
- It is the responsibility of the owner/operator of the MixRite, to determine the
correct amount of solution and injection ratio to obtain the desired result
- Adjustment must be made when there is no pressure in the MixRite. Turn off
the water supply and allow the pressure to drop to zero.
- Do not remove the lower U-Latch (For maintenance purpose only)!
Every stroke of the MixRite moves a predetermined volume of water with a
predetermined volume of liquid additive. Adjust the volume of liquid additive as
follows: