Installation & Battery Replacement - Simons Voss Technologies TRA.PINCODE Guide Abrégé

(MK.)TRA.PINCODE
Repeat the process to programme other User PINs into the locking plan.
Using a pro-
Open the programming app or task list and follow the instructions.
gramming
app or task
list
5 Installation & battery replacement
The PIN code keypad can be installed using the supplied installation
accessories.


Install the PIN code keypad at a distance of up to 20 cm from the
locking device.
The PIN code keypad housing must be open to replace the batteries.
You will need a "TX6" Torx screwdriver (not included in the supply
package) to do so. Replace all batteries with new Sony, Panasonic or
Varta CR 2032 (3V) batteries.
EN
9 The programming process is now complete.
You can use the enclosed special adhesive pad to attach the PIN
code keypad, making installation quick and easy.
We recommend using the supplied screws to secure the
component. You will need a "TX6" Torx screwdriver (not included in
the supply package) to open the housing.
5. Installation & battery replace-
ment
21 / 88