Programming A User Pin - Simons Voss Technologies TRA.PINCODE Guide Abrégé

(MK.)TRA.PINCODE
4. Re-enter the new Master PIN
IMPORTANT
The Master PIN is essential to use the PIN code keypad and cannot be
imported, read or regenerated. Make a note of the Master PIN and keep
it in a safe, secret place.
The Master PIN can be changed at any time. No programming is re-
quired to make a change.

3.2 Programming a user PIN

Up to three User PINs can be issued in the PIN code keypad. The User
PIN may consist of between 4 and 8 digits, which must not be
consecutive or identical.
An aid to better understanding: Each User PIN behaves as a separate
transponder. As a result, these individual User PINs must be
programmed in the respective (internal) transponders (1, 2 & 3).
1. Enter 0
2. Enter Master PIN
3. Enter User PIN – e.g. 1 for User PIN 1
4. Enter the length of the User PIN – e.g. 4 for a 4-digit User PIN
5. Enter User PIN
EN
9 The new Master PIN must consist of 8 characters which must
not be consecutive or identical and must not begin with 0.
3. Configuration
19 / 88