General Device Description - Parker SCPT-CAN Mode D'emploi

2.

General Device Description

The SCPT-CAN sensor is a pressure transducer from the SCPT-XXX-
C2-05 series. Pressure transducers are used for measuring pressure
and temperature in hydraulic systems. The measured values are then
transmitted over the standardized CANopen serial bus protocol. The
SCPT-CAN sensor should only be used for measurements with the Park-
er Service Master Plus measuring instrument. The sensor features an
LED which can signal the current sensor status.
CAUTION
Be sure to used the SCPT-CAN sensor only in conjunction with
the Parker Service Master Plus measuring instrument. This will
ensure that correct measurements are obtained and that sen-
sor damage is avoided.
29