Maintenance/Care - Warn 80368 Instructions D'installation

WARNING
READ THE VEHICLE'S OPERATOR MANUAL,
WINCH OPERATOR MANUAL, AND ALL WARN-
ING LABELS PRIOR TO OPERATION OF UTV
AND WINCH.
THE WINCH MOUNTING PLATE INSTALLATION IS NOW COMPLETE.
• Wire winch according to instructions found in winch kit.
PROCEED TO SECTION TITLED "MAINTENANCE/CARE".
WARNING
FAILURE TO SECURELY TIGHTEN ALL BOLTS
ON THE WINCH PLATE, WINCH, AND
FAIRLEAD CAN RESULT IN PRODUCT FAILURE
WHICH MAY RESULT IN VEHICLE DAMAGE
AND OPERATOR INJURY OR DEATH. DOUBLE
CHECK THAT ALL BOLTS ARE SECURELY
TIGHTENED PRIOR TO USE.
VII. MAINTENANCE/CARE
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware
that appears rusted or deformed.
2. Inspect all nuts and bolts on the winch, winch mount, and related hardware prior to each use. Tighten all
nuts that appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
PERFORM REGULAR INSPECTIONS ON THE WINCH, WINCH MOUNT, AND RELATED HARD-
WARE. NEVER OPERATE THE WINCH WITH DAMAGED OR MISSING PARTS. FAILURE TO
FOLLOW THIS WARNING MAY CAUSE VEHICLE DAMAGE AND OPERATOR INJURY OR DEATH.
WARNING
PAGE 7 80369A0