Model Specifications - Twin-Star International ClassicFlame 52EB497GRA Manuel D'instruction

THE BUILDERS BOX SERIES HAS BEEN TESTED AND APPROVED IN ACCORDANCE WITH
CSA AND UL STANDARD.
MODEL
DESCRIPTION
NUMBER
52" STANDARD
52EB497GRA
THE INSTALLATION OF THE BUILDER BOX MUST COMPLY WITH THE APPLICABLE
LOCAL AND / OR NATIONAL ELECTRICAL CODES AND UTILITY REQUIREMENTS.
THIS INSTALLATION SHOULD BE ENTRUSTED TO ONLY QUALIFIED
STEP - BY - STEP INSTALLATION OVERVIEW
Section 1.) Prepare product for installation.
Section 2.) Rough in framing following the recommended dimensions.
Section 3.) Mount the unit.
Section 4.) Wire the unit to the power supply.
Section 5.) Wire the control box.
Section 6.) Function check.
Section 7.) Finish wall construction.
Section 8.) Finalize product installation.
Section 9.) Electric wirng diagram.
LISTINGS AND CODE APPROVALS

MODEL SPECIFICATIONS

VOLTAGE
120
!!! WARNING !!!
PERSONNNEL WHERE REQUIRED BY LAW.
(Please read all instructions before installation)
RATED POWER
WATTS
25
E-2
REMOTE
AMPS
CONTROL
YES 0.25