First Installation - Megasat Royal Line 32 Mode D'emploi

5. First installation

1. Connect the TV to the power supply and turn on the power switch at the bottom of
the housing. The TV is now in standby mode (LED is RED).
2. Then press the Power button on the re-
mote control (LED is GREEN).
3. After the TV is started, the First Installation
menu appears. You can now make the fol-
lowing settings:
• Language:
• Country:
• Home-state:
• Auto power off:
• OK button:
Tuning Setup
Reception mode:
Digital Typ:
Defaults for signal search
DVB-S (Satellit)
Satellit:
Astra 19.2° Ost
Search mode:
Standard
Channels type: Alle Kanäle
Service type:
Alles
Have you made all the settings, start the channel search with OK.
Select a language for the OSD. To modify, use the
Select the country. To modify, use the
Select the display attribute of the TV:
Home-mode = dynamic and high-contrast colors
Store Mode = neutral colors
Set here if the TV should turn off automatically if no
operation is performed on the unit.
Starts „Auto Tuning" for Terrestrial, Cable or Satellite television.
Use the keys to select the reception mode
t u
ATV (analogue) and/or DTV (digital)
Choose between Satellite, DVB-C or DVB-T
DVB-C (Cable)
Scan Typ:
Sorting by LCN: On
(LCN is an automatic channel
sorting)
ENGLISH
DVB-T (Terrestrial)
Sorting by LCN: On
Full
(LCN is an automatic channel
sorting)
keys.
t u
keys.
t u
09