STEAMONE H3S Manuel Utilisateur page 14

Useful steps for maintenance:
Unplug the unit and remove the steam hose from
1.
main unit. Collapse the telescopic poles.
2. Lay the base on its right side. Unscrew and
remove the drain plug. (fig.26)
3. Make sure the base is above a water container.
Fill the water tank with tap water, replace the
fig.26
water tank cap and put the water tank back on
the base.(fig.27)
4. The water will flow out with the calcium residue.
(fig.28)
5. Maintenance is complete.(fig.29)
fig.28
6. Replace the drain plug.
Don't fill the boiler by the steam head holes! Never immerse the
steam head in water.
fig.27
fig.29
14