Prepare The Hood - Best U102E Mode D'emploi

PREPARE THE HOOD

Unpack hood and check contents.
You should receive:
1 - Hood
1 - 8" Damper / Duct Connector
1 - Glass Visor
1 - Decorative Spacer
1 - Parts Bag containing:
2 - Mounting Brackets
4 - Machine Screws (M4 x 30mm Pan Head)
7 - Mounting Screws (3.9 x 9.5mm Pan Head)
4 - Flat Washers (4 mm diameter)
8 - Screws (4.2 x 15mm Pan Head)
1 - Installation Instructions
8" DAMPER/DUCT CONNECTOR
2 MOUNTING BRACKETS
4 FLAT WASHERS
DECORATIVE SPACER
4 MACHINE SCREWS
(M4 x 30mm PAN HEAD)
8 MOUNTING SCREWS
(4.2 x 15mm PAN HEAD)
7 MOUNTING SCREWS
(3.9 x 9.5mm PAN HEAD)
- 7 -
GLASS VISOR