Accessories - Ribind K800 FCE Mode D'emploi

ACCESSORIES -

For the connections and the technical data of the optional equipments follow the relevant handbooks.
PLATE TO BE CEMENTED
S18
S18 to embed (NO+NO) code ACG1054
S18 to wall (NO+NO) code ACG1056
SAIL
35
102.5
47.5
SAIL orange with built-in flashing board
SAIL white with built-in flashing board
SAIL LATERAL SUPPORT
TOUCH
MECHANICAL SAFETY STRIP L = 2 m
CERTIFIED EN 12978 - EN 13849-1:2016 PL "b" CAT.3
code ACG8107
S18 to embed (NO+NC) code ACG1054S
S18 to wall (NO+NC) code ACG1056S
code ACG7072
code ACG7078
code ACG8054
code ACG3015
NYLON RACK MODULE 4
with zinc plated angle Iron, In 1mt. bars. Ideal for gates up to 1,000 kg / 2,200 lbs weight.
1 m / 3,28"
10 m / 32,8" (1 m / 3,28" x 10)
RACK MODULE 4
with zinc plated angle Iron, in 2 m bars.
Ideal for gates up to 1,000 kg / 2,200 lbs weight.
FIT SYNCRO
EN12978 - EN13849-2
FIT SYNCRO PHOTOCELLS for the wall-installation
The range you can set is 10-20 m, 30÷60ft.
You can fit many couples close together thanks to the synchronising circuit.
Add the SYNCRO TRANSMITTER
for more than 2 photocells couples (up to 4).
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
PAIR OF COLUMNS FOR FIT SYNCRO
39
code ACS9000
code ACS9001
H = 0,5 m
VERTIGO
PHOTOCELLS SUBSTITUTING THE SAFETY STRIP
CERTIFIED EN 12978 - EN 13849-1 PL "c" CAT 2
VERTIGO 8 cod. ACG8044
VERTIGO 10 cod. ACG8045
Applicable vertically and horizontally to sliding and swing
gates.
G
B
code ACS9050
code ACG8026B
code ACG8028
code ACG8051
code ACG8057