Publicité
Step 6
Verify that the burner is on
If the burner is on, replace the hatch
If not, turn off the gas and go back to Step 5
If the burner still does not ignite go to Step 7
Parts required:
Assembled Ooni Pro
with Ooni Pro Gas-
Burner FSD
Hatch
14
Step 7
If the burner still does not ignite
Turn the gas on and light using a match and
the supplied match holder through the hatch
at the back of the oven
You can now set the required power level
If the flames go out turn off the gas and wait 5
minutes before reigniting
Parts required:
Assembled Ooni Pro
with Ooni Pro Gas-
Burner FSD
15
Publicité
