Samsung DVE45R6300 Serie Manuel D'utilisation page 50

Masquer les pouces Voir aussi pour DVE45R6300 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operations
Smart Care
To enable this function, you must first download the SmartThings app at the Play Store
or the App Store and install it on a mobile device featuring a camera function. The Smart
Care function has been optimized for Galaxy & iPhone series (applicable models only).
1. When the dryer detects an issue to check, an information code appears on the display.
To enter Smart Care mode, press and hold Wrinkle Prevent for 3 seconds.
2. The dryer starts the self-diagnosis procedure and displays an information code if a
problem is detected.
3. Run the SmartThings app on your mobile device, and then tap Smart Care.
4. Put the mobile device close to the dryer's display so that the smartphone camera and
the dryer face each other. The app automatically recognizes the information code.
5. When the information code is recognized correctly, the app provides detailed
information about the problem with applicable solutions.
NOTE
• The function name, Smart Care, may differ depending on the language.
• If light is reflected off the dryer's display, the app may fail to recognize the information
code.
• If the app fails to recognize the information code, you can enter the code manually in
the app.
50
English
Untitled-1 50
2019-09-16
4:03:49

Publicité

Table des Matières
loading

Table des Matières