Before You Start; Sort And Load; Functional Prerequisite - Samsung DVE45R6300 Serie Manuel D'utilisation

Before you start

Here are a few things you should know before starting your dryer.

Sort and load

• Put one wash load in the dryer at a time.
• Do not mix heavy and lightweight items together.
• To improve drying efficiency for one or two items, add a dry towel to the load.
• For best results, untangle items before inserting them into the dryer. Tangled items
may degrade the drying efficiency or cause the door to open.
• Overloading reduces the tumbling action, resulting in uneven drying and wrinkling.
• Unless recommended on the care label, do not dry woolens or fiberglass items.
• Avoid drying unwashed items.
• Do not dry items soiled with oil, alcohol, gasoline, etc.

Functional prerequisite

Lint filter
38 English
Untitled-1 38
A
To prevent a risk of fire, make sure to
clean the lint filter before or after every
load.
1. Turn off the dryer.
2. Open the door and pull out the lint filter
(A) from inside the drum.
3. Open the lint filter by separating it at
the top. Remove the lint, and then clean
the lint filter.
4. Close the lint filter, reinsert the lint
filter into the dryer, and then close the
dryer door.
CAUTION
• Do not operate the dryer without the
lint filter in place.
• Do not use a damaged or broken lint
filter. This may reduce performance
and/or cause fire.
2019-09-16 4:03:46