Safety; General; Customer's Responsibility - Kröber OXYDERME THBO Manuel D'utilisation

Oxyderme THBO

2. Safety

This section provides an overview over all important safety aspects for safe
and trouble-free operation of the unit.
The individual chapter additionally contain actual safety notes highlighted
with symbols, which will help to avoid immediate dangers.

2.1 General

The machine is built according to the currently applicable rules of technology
and is safe to operate.
However, dangers may still arise from the unit if it is incorrectly operated or
used for purposes it is not intended for.
Any persons using this unit must have read and understood these instruc-
tions before starting operation. This also applies if the person in question has
already worked with just such a unit or similar equipment or was trained by
the manufacturer.
Knowing the content of these instructions for use is a prerequisite for the
avoidance of mistakes and for safe and trouble-free operation of the unit.
Neither changes nor conversions may be carried out on the equipment,
which have not been explicitly authorized by the manufacturer, to avoid
dangers and to ensure optimal performance.
All safety decals and operating signs on the unit must be kept well legible at
all times. Damaged or illegible decals must be replaced immediately.

2.2 Customer's responsibility

These instructions for use must be kept near the unit, so that it is available
for the user at any time.
Apart from the notes on safety mentioned in this manual, all generally valid
safety and accident prevention instructions must also be observed and
adhered to.
The machine may only be operated in a technically perfect condition and if
operationally safe.
The information contained in the instruction manual is complete and must be
adhered to without limitation.
6