Using The Mini-Chopper - Brandt MX5SLIMV Manuel D'instruction

 Select the desired speed with the speed selector. The selector is on the top of the
machine (1). Turn it anti-clockwise towards "Max" to increase the speed.
 Press the Start button (2). The green operating light appears around the button.
 Once you have finished release the Start/Stop button to stop the machine.
 Remove the machine from the container and unplug it.
 Then detach the blender foot from the motor body and clean in accordance with the
instructions below.
Recommendations for Use
1. For hard food (e.g. cheese) dice to avoid blocking the blades.
2. If the food remains stuck to the sides of the bowl, remove the bits using a spatula.
Distribute them in the container and press the Start button again.
c)

Using the Mini-Chopper


Introduce the mini-chopper blade (15) onto the shaft located in the middle of the bowl
 Put in the food to be chopped
 Close the chopper with the lid (14) and then fit the machine body on the mini-chopper lid
in accordance with the diagram (H).
 Select the desired speed with the speed selector. The selector is on the top of the
machine. Turn it anti-clockwise towards "Max" to increase the speed.
 Press the Start button. A green start light appears around the button.
 Once you have finished release the Start/Stop button to stop the machine.
 Unplug the machine.
 Then detach the mini-chopper from the motor body.
 You can now serve your preparation.
 Clean according to the instructions given below.
20