Using Your Machine; Using The Mini-Chopper - Brandt HAC300V Manuel D'instruction

3) USING YOUR MACHINE

a)

Using the Mini-Chopper

1. Place the machine on a stable flat surface.
2. Put the double blade (5) on the central shaft of the mixer bowl (6).
3. Pour the ingredients cut into small pieces into the bowl without exceeding the maximum
level shown on the wall.
4. Place the safety lid (3) on the bowl. If the rubber seal (4) has not been put in place
previously, please fit it on the safety lid.
5. Place the motor unit (2) on the mixer bowl (6).
6. Plug the lead into the mains.
7. Press the push-button (1).
Never use the machine continuously for more than 30 seconds to prevent it
overheating.
The machine will not start if the parts are not correctly assembled.
Always hold the motor firmly when you press the push-button.
Never chop products that are too liquid like water.
8. Release the pressure to stop the mini-chopper.
Wait until the blades stop completely before removing the lid.
9. Unplug the machine and then release the mixer bowl from the motor unit. You can then
remove the blades before emptying the contents of the mixer bowl.
16