Télécharger Imprimer la page
Stelpro STZW402WB+ Démarrage Rapide
Stelpro STZW402WB+ Démarrage Rapide

Stelpro STZW402WB+ Démarrage Rapide

Publicité

Liens rapides

QUICK START
DÉMARRAGE RAPIDE
ADVANCED SETTINGS (MENU)
PARAMÈTRES AVANCÉS (MENU)
Z-WAVE connectivity
Display format (°C or °F)
HEATING mode
(fan or baseboard)
LOCK mode
Outdoor temperature
display
Backlight intensity
°STELPRO menu
TO MODIFY AN ADVANCED SETTING
POUR MODIFIER UN PARAMÈTRE
A
Enter ADVANCED SETTINGS
Accédez au MENU PRINCIPAL
B
Select desired menu (from 1 to 7)
Sélectionnez le menu souhaité (de 1 à 7)
C
Enter menu
Accédez au menu souhaité
D
Change the setting value
Modifiez le paramètre
E
Confirm selection
Confirmez la sélection
To exit the advanced settings press the UP and DOWN buttons for
3 seconds at any time. If the thermostat is left idle it will revert back to the
main screen after 30 seconds.
Pour quitter les paramètres avancés, appuyez sur les deux boutons
pendant 3 secondes à tout moment. Si le thermostat est resté inactif, il
reviendra à l'écran principal après 30 secondes.
For further information or to consult the
complete User Guide, please visit our website.
Pour obtenir de plus amples renseignements
ou pour consulter le guide d'utilisateur complet,
visitez notre site web.
www.stelpro.com
ADVANCED SETTINGS can
be accessed directly on the
thermostat.
LES PARAMÈTRES AVANCÉS
sont accessibles directement
sur le thermostat.
1
Connectivité Z-WAVE
2
Format d'affichage (°C ou °F)
Mode CHAUFFAGE
3
(aéro-convecteur ou plinthe)
4
Mode VERROUILLAGE
Affichage de la température
5
extérieure
Intensité du rétroéclairage
6
7
Menu °STELPRO
3
Press and hold both buttons
for 3 seconds
Appuyez et relâchez les deux
boutons pendant 3 secondes
Press and release the
UP or DOWN button until
desired menu is shown
Appuyez et relâchez le
bouton du HAUT ou du
BAS jusqu'à ce que le
menu souhaité apparaisse
Press and release both
buttons
Appuyez et relâchez les
deux boutons simultanément
Press and release UP or
DOWN button to select the
desired setting value
Appuyez et relâchez le
bouton du HAUT ou du BAS
pour modifier la valeur
Press and release both
buttons
Appuyez et relâchez les
deux boutons simultanément
QSINS_STZW402_0516

Publicité

loading

Sommaire des Matières pour Stelpro STZW402WB+

  • Page 1 Mode VERROUILLAGE Outdoor temperature Affichage de la température display extérieure Backlight intensity Intensité du rétroéclairage °STELPRO menu Menu °STELPRO TO MODIFY AN ADVANCED SETTING POUR MODIFIER UN PARAMÈTRE Enter ADVANCED SETTINGS Accédez au MENU PRINCIPAL Press and hold both buttons for 3 seconds Appuyez et relâchez les deux...
  • Page 2 WARNING AVERTISSEMENT Before installing and operating this product, the owner and/or installer must read, understand and follow these instructions and keep them handy for future reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.