Display Mode - Crouzet CTR24L-2511 Notice De Mise En Service

Tachometer/Frequency meter
(Operating mode frequency meter)
1. Description
• 6 digit frequency meter
• Red LED display, character height 8 mm
• Display range from 0 to 999 999
• Leading zeros suppression.
• Programming via two setting keys on the front
side
• During programming, the display guides the
user with text prompts
• Value conversion and display in 1/s or 1/min
2. Inputs
INP A
Dynamic count input.
3. Programming routine
The programmable parameters of the device are
described below, in the order in which they can be
set. The device is fully programmed after one
pass of the routine.
The first values stated correspond to the factory
settings
3.1 Polarity of the inputs
3.2 Switching on the 30 Hz filter
* where bounce occurs, e.g. with contacts
4
npn: switching for 0 V
pnp: switching for +U B
The filter provides input
damping*
30 Hz filter off (f max )
30 Hzfilter on
3.3 Multitplying factor
3.4 Dividing factor
3.5 Decimal point

3.6 Display mode

It can be set from 00.0001
up to 99.9999.
The decimal point is set to
4 decimal places.
„0" is not accepted!
It can be set from 00.0001
up to 99.9999.
The decimal point is set to
4 decimal places.
„0" is not accepted!
The decimal point defines
the resolution in the select-
ed measuring range 1/min
or 1/sec
0 no decimal place
0.0 one decimal place
0.00 two decimal places
0.000 three decimal places
Value conversion and
display in 1/s
Value conversion and
display in 1/min