Southwire QWIKjax Instructions D'utilisation Et D'entretien page 9

OPERATION
6. Turn the QWIKjax™ crank handle (1) clockwise to extend one reel
stand until the cable reel clears the ground on one side (Fig. 9).
Fig. 9
7. Turn the other QWIKjax™ crank handle (1) until the spindle is
level and the cable reel rotates freely (Fig. 10).
Fig. 10
8. When finished dispensing cable, lower one side of reel by turning one of
the QWIKjax™ crank handle(1) counter-clockwise until one side of the
reel contacts the ground. Repeat this step on the other side to complete
lowering of the reel.
9. Remove safety catch hook pins (10) from both QWIKjax™ Reel Stands
and lower both safety catch hooks (9). Remove axle by sliding it out of
the reel and roll reel out of the way. Replace safety catch pins (10) back
into safety catch hooks (9).
10. To store the QWIKjax™ place the carriage at the highest setting
and remove base leg pin (7) and lower jack (8). Replace supplied
base leg pin (7) and secure with cotter key lock.
8