Specifications; Troubleshooting - Anker NEBULA Cosmos Mode D'emploi

EN

Specifications

Specifications and design are subject to change without notice.
Power supply: 19V 6.32A
Power consumption: < 120W
Standby power consumption: < 0.5W
Display technology: DLP FHD1920x1080P
Light source: RGB LED
Projection image size: 30-120 inch
Resolution: 1920 × 1080p
Brightness: 900 ANSI Lumens
Contrast ratio: 1000:1
Throw ratio: 1.2
Throw distance: 0.8m to 3.18m
CPU: Quad-core ARM Cortex-A55
OS: Android TV 9.0
RAM: 2GB DDR
ROM: 8GB eMMC
Speaker drivers: 10W × 2
Wi-Fi: IEEE802.11a/b/g/n/ac Dual Frequency 2.4G/5G
Bluetooth version: V4.2
USB file system: FAT32 / NTFS / exFAT
Recommended ambient: 41°F to 95°F / 5°C to 35°C
Relative humidity: 15% ~ 85% (non-condensing)
Storage temperature and humidity: < 149°F / 65°C, < 90% humidity
Dimensions (H*D): 290 × 198 × 92 mm / 11.4 × 7.8 × 3.6 inch
Weight: 2 kg / 70.5 oz
15

Troubleshooting

① Fail to turn on the projector with the remote control?
• Press on the projector to turn it on.
• When powered off, you cannot use the remote control to turn it on.
② The remote control doesn't work?
• Make sure the battery is already installed in the remote control.
• Replace the batteries.
③ Blurred image?
• Press to manually adjust the focus.
④ Cannot connect to a Wi-Fi network?
• Refresh the list of available networks and retry.
• Reboot the wireless router or the device and retry.
⑤ How do I update the firmware?
• When a new version is detected you will be asked to reboot and update.
EN
16