Using Nebula Cosmos - Anker NEBULA Cosmos Mode D'emploi

Masquer les pouces

Les langues disponibles

[Auto]: Automatically detects whether the projector is inverted.

Automatically switch between these options.

[Front Projection]: The projector is located in front of the

projection surface.

[Rear Projection]: The projector is located behind the

projection surface.

[Projector Mode]

[Inverted Front Projection]: The projector is hanging

from the ceiling in an upside down position. The image is

rotated by 180 degrees.

[Inverted Rear Projection]: The projector is hanging

from the ceiling in an upside down position behind the

projection surface. The image is rotated by 180 degrees

and horizontally mirrored.

5. Apps

① On the home page, select

> [Apps], and press

② Select an app and check the current version, open or force stop, check the storage

used, clear data or cache, or enable or disable notifications and permissions.

6. Others

On the home page, select to find more setting options.

[Device Preferences]

[About]

Check the device information and firmware version.

[Date & time]

Manually set the date and time.

[Language]

Select the on-screen language.

[Keyboard]

Select the keyboard language type.

[Sound]

Select the audio output source and sound format.

[Storage]

Check the device storage and removable storage.

[Reset]

All data from your device's internal storage will be erased.

[Automatic date & time]

Enable or disable automatic date and time.

[Set date]

Manually set date.

[Set time]

Manually set time.

[Set time zone]

Set a time zone.

[

Use 24-hour format]

Enable or disable 24-hour format.

[Date & Time]