Notice - Anker NEBULA Cosmos Mode D'emploi

EN

Notice

This product complies with the radio interference requirements of the European
Community.
Declaration of Conformity
Hereby, Anker Innovations Limited. declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU. For the
Declaration of Conformity, visit the Web site www.SeeNebula.com
RF exposure information (for D2140): The Maximum Permissible Exposure (MPE)
level has been calculated based on a distance of d=20 cm between the device and the
human body. To maintain compliance with RF exposure requirements, use products that
maintain a 20cm distance between the device and human body.
Wifi Operating Frequency Range (for D2140):2412~2472 MHz(2.4G); 5150~5250 MHz,
5725~5850 MHz (5G)
Wifi Max Output Power (for D2140) :19.35 dBm(ERIP for 2.4G);22.09 dBm(ERIP for 5G)
BT Operating Frequency Range (for D2140) : 2402~2480 MHz; BT Max Output Power (for
D2140):9.2 dB(ERIP)
5150~5250 MHz can be used indoors only.
RF warning statement for D0413:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
Bluetooth Operating Frequency Range(for D0413) 2402~2480MHz; Bluetooth Max
Output Power(for D0413):4.346dBm(EIRP)
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3-5, 80807 Munich,
Germany
Anker Technology (UK) Ltd,Suite B I Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste,
and should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
17
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the
separation between the equipment and receiver. (3) Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected. (4) Consult the
dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirements. The device
can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to
maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone:1-800-988-7973
모델명 : D2140
인증번호 : R-C-AIl-D2140
제품명 : 특정소출력 무선기기 ( 무선데이터통신시스템용 무선기기 )
제조자및제조국가 : Anker Innovations Limited
제조국 : 중국 CHINA
제조년월 : 2020.05
해당 무선설비는 운용 중 전파혼신 가능성이 있음 . 해당
무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된
서비스는 할수 없음 .
모델명 : D0413
인증번호 : R-C-AIl-D0413
제품명 : 특정소출력 무선기기 ( 무선데이터통신시스템용 무선기기 )
제조자및제조국가 : Anker Innovations Limited
EN
18