WaterLink SpinTouchDW Mode D'emploi page 13

RANGES AND SPECIFICATIONS
Test Factor
Alkalinity, Total
Chlorine, Free
Chlorine, Total
Combined Chlorine
Hardness, Total
Iron, Ferrous, soluble
Iron, Ferric, soluble
Iron, Total, soluble
pH
†
Go to SETTINGS>Other Settings to select hardness units.
Test results that are out of range of the reagent system wil be RED. RED test results may
not be accurate. Go SETTINGS>Other Settings to turn the Ranges Enabled feature OFF.
Instrument Type
Wavelengths
(interference fi lters)
Display
Wavelength Accuracy
Wavelength Bandwidth
Photometric Range
Photometric Precision
Photometric Accuracy
Sample Chamber
Light Source
Detectors
Pre-Programmed Tests
Languages
Temperature
Operation Humidity Range
Communication
Calibration
Firmware
Software
Power Requirements
Battery Type
Minimum Capacity
Range
0–250 ppm
0.00–15.00 ppm
0.00–15.00 ppm
0.00–15.00 ppm
0–70 gpg/0-1200 ppm
0.0–6.0 ppm
0.0–6.0 ppm
0.0-6.0 ppm
6.5-10.0
Centrifugal Fluidics Photometer
390 nm, 428 nm, 470 nm, 525 nm, 568 nm, 635 nm
Color Capacitive Touchscreen,
3.5 in, 320 x 240 pixel resolution
±2 nm
10 typical
-2 to 2 AU
±0.01 AU at 1.0 AU
±0.01 AU at 1.0 AU
Accepts prefi lled disk
6 LEDS
6 silicon photodiodes
Yes, with automatic wavelength selection
English, French, Spanish, German, Dutch, Swedish, Portuguese,
Italian, Chinese, Turkish
Operation: 0-50 °C; storage – 40-60 °C
0- 90 % RH, non-condensing
USB-C, Bluetooth low energy technology (BLE)
Factory set, fi eld calibration via internet connection
Internet updateable (New Test, New Test Calibrations, etc.)
Android & iOS Apps, WaterLink® Solutions, WaterLink® Connect
USB wall adapter, USB computer connection or internal lithium
ion rechargeable battery
Lithium ion
12 V/2.6 AH
13
Display Abbreviation
ALK
FCL
TCL
CCL
†
Hardgpg/T HARD
FERROUS
FERRIC
T IRON
pH