Replacement Of The Hose - Piusi F0075010B Notice D'utilisation Et D'entretien

IMPORTANT: Any maintenance operation shall be carried out by a suita-
bly trained staff, following carefully the information given in this manual.
Ensure that there is no tension in the spring before starting any opera-
tions inside the hose reel.
Always close the feeding of fluid to the machine before carrying out any maintenance on it.
Replace the flexible hose as soon as it shows any sign of wear and tear or of deterioration
due to the different conditions of the labour environment. We advise you to replace it every
year in case it is used for a few hours a week.
Replace the seal inside the revolving joint in case of losses due to wear and tear. Any repla-
cement of hose reel parts has to be done using original spare parts.
We advise you to contact the manufacturer for any possible anomaly and before replacing
any part. After every maintenance operation, put again the eventual supports.
10 - MAINTENANCE

11 - REPLACEMENT OF THE HOSE

11.1 11.1) Remove the hose rubber stopper and release
11.2) Remove the plastic protection and loosen the
11.3) Loosen the two screws of the spring likage shaft
11.4) Disassemble the opening on the spring side and
11.2
11.5) Take out the drum, unscrew the internal fitting
11.6) Assemble again the hose reel, by following the
11.7) Go on as indicated at the chapter: "Mounting of
11.3
11.4
WARNING! For safety reasons, ope-
rations of hose replacement must be
carried out at the bench.
Replace the hose with another one of the same
dimensions and characteristics.
the hose slowly until the spring is completely
unloaded.
swivel joint.
by a 10 wrench.
unwind completely the hose from the drum.
with the suitable wrench and mount the new
hose (see the chapter "Hose assembly").
above steps in reverse order. If that is the case,
grease the supports and the ratchet hook.
the hose".
DO NOT PUT HANDS OR ANY OTHER
THING INSIDE THE DRUM!
- 13 -
11.5