Manual Configuration - THOMSON 512392 Manuel D'utilisation

Motorised 720P Hd WiFi iP caMera
• Your camera will be configured automatically in
the Thombox interface. Enter your username
and password:
• If you want your camera to send images to the
Thombox when motion is detected, click on
the 'Copier les réglages dans la caméra [Copy
settings to camera]' button at the bottom
of the window. Your Thombox will then write
the destination for the images to the camera
settings.
• This completes the configuration.
(Click on the icon in the cameras widget on your
Thombox to display more details on the functions
and options available).

2 - MANUAL CONFIGURATION

If you do not want to configure your Thombox
automatically, here is the full list of commands
your Thombox will need to know for it to use your
camera:
h - uSiNg ThE prOduCT WiTh A ThOMBOX
1
2
3
4
5
6
7
8
1
Assign a suitable name to the camera
2
Address for connecting your camera to the
interface, filled in automatically when you
add the camera (do not forget the ':88' at
the end of the address)
3
Your camera's username (default = admin)
4 Your camera's password (default = none)
5 High quality stream: the address is:
rtsp://ip address of your camera:88/
videoMain (no spaces)
the default resolution of this stream is
1280x720 @ 15 frames per second
6 Low quality stream: the address is:
rtsp://ip address of your camera:88/
videoSub (no spaces)
the default resolution of this stream is
640x480 @ 15 frames per second. This can
be useful if the internet connection is slow.
7
The command for taking a snapshot with the
camera is:
/cgi-bin/CGIProxy.fcgi?usr=your username
&pwd=password&cmd=snapPicture2
(no spaces)
8 Permitted delay for loading the image
capture. 5 seconds is a reasonable value;
test it if you want to change it.
The FTP settings must be copied using your
camera's Network menu - FTP Settings.
1
2
3
4
5
6
en
15