F - Using The Product On A Computer Via The Thomview Software - THOMSON 512392 Manuel D'utilisation

Motorised 720P Hd WiFi iP caMera
F - uSiNg ThE prOduCT ON A COMpuTEr ViA ThE ThOMViEW
You can only configure the camera and image
display as described in paragraph D - 1 - ACCESS
TO CAMERA CONFIGURATION if your computer
is on the same network as your camera.
The ThomView software on the CD provides an easy
way to connect to the camera over the internet and
avoids these limitations.
• Install the program on the computer you want
to use to connect to your camera.
• Run the software on your computer. The default
username and password of the software are
both 'admin'.
• Click on the 'Settings' icon, then on 'Add
P2P Camera'.
• This brings up a window for you to enter the
name you want to give your camera, the 'user'
username of your camera (default = admin),
its password (default = none, leave blank) and
UID. The UID is a unique code assigned to your
camera.
• Confirm by clicking on 'OK', then click on the
'Live view' icon.
• Your camera is displayed in the 'default' list in
the top left of your screen. Click on its name to
display the feed.
The ThomView software lets you manage several
cameras at once and gives you complete control
over each one and their respective settings:
6 3 4 5 2
10 9 8
1 7
1 Lock software tocontinue broadcasting a
video but disable changing cameras and
current settings
2 Historique de tous les évènements [Events
log] for all cameras registered to the
ThomView program
3 Access to live video
4 Access to videos and snapshots saved to
the computer by the cameras
5 Search, pairing and configuration menu for
each camera. Click on 'Search Cameras'
to find all the cameras on your computer's
network, click on 'System', then click on any
of the cameras in the list on the right to
display and change its configuration.
6 Click on the name of your camera to display
its feed. This brings up a list; click on any row
to enable that camera's mic (Audio), start
recording a video on the computer (Record),
take a snapshot (Capture) and/or activate
the camera's loudspeaker (Talk).
7 Camera feed A red border around the feed
denotes that the camera has been selected.
If you have several cameras, click on another
area of the screen to display the feed from
a different camera in one of the other areas
of the screen. You can drag and drop a
camera feed from one section to another if
you want to rearrange the screen.
8 Arranging the screen layout: click to only
display one camera feed at a time, 4
cameras at once, and so on.
9 Software activity log: shows all the events
logged by the software with respective dates
and times.
10 Camera controls: click on each heading to
open and display the list of controls: image
and quality settings, enable/disable night
vision, etc.
SOFTWArE
en
13