Nahita blue 5173 Serie Mode D'emploi page 22

•
Never place on the pan an object heavier than the maximum capacity of the
balance, the sensor could be damaged.
•
Neither submerge the balance nor spill liquids on it.
•
When you are not using the balance for a long period of time, lock the
rechargeable battery.
•
If any liquid comes into contact with the electric parts of the balance please do
immediately disconnect it from the net and send it to the technical service, as
soon as possible, for its checking and adjustment.
•
Always use original components and supplies. Other devices can be similar
but they can damage the equipment.
Cleaning
•
Never use scourers or substances that can grate for cleaning metallic parts
such as stainless steel, aluminium, coatings, etc. as they damage the balance
and produce an early ageing of the equipment.
•
Use a fluff-free cloth dampened with soaped water that does not contain
abrasives.
ATTENTION!! IF EQUIPMENTS ARE NOT PROPERLY CLEAN AND DISINFECTED
THEY WOULD NOT BE ALLOWED TO REPAIR BY OUR TECHNICAL SERVICE.
Troubleshooting
Problem
Upper line - - - -
Under line _ _ _ _
Err-1
Err-2
Cause
Overload
Overload or loadcell broken
Too frequently turn on and off
the balance
The balance is not stable
Solution
Make sure the wait of the simple does not
exceed the maximum capacity of the
balance.
Re-calibrate the balance
Re-calibrate the balance
Turn off the balance, resume it after 3
seconds
Wait for a few seconds for stabilization
21